080V26201-7236 Engine Starter for HOWO Truck

The 080V26201-7236 starter motor is an essential high-performance component specifically engineered for HOWO commercial vehicles. Manufactured to precise specifications, this robust starter ensures reliable ignition in all operational conditions for HOWO truck engines. Optimized for heavy-duty applications, the 080V26201-7236 provides immediate cranking power even in extreme temperatures from -40¡ãC to 120¡ãC. Its innovative copper alloy commutator reduces voltage drop by 15% compared to conventional starters while maintaining optimal torque transfer efficiency.

Durability is engineered into every 080V26201-7236 unit through hardened steel gears and triple-sealed bearings that withstand vibration levels exceeding 15G. The copper-wound armature delivers consistent high-torque output between 28-32 N.m, achieving engine start within 1.5 seconds under full-load conditions. Compact design allows seamless integration into multiple HOWO engine configurations including WD615 and D12 powertrains. Operators report 30% reduction in ignition failures after installing the 080V26201-7236 starter, particularly valuable in commercial fleet operations with demanding duty cycles.

Precision Engineering Specifications

Every 080V26201-7236 starter undergoes electromagnetic simulation testing to validate performance curves matching OEM specifications. The planetary gear system amplifies rotational force while maintaining compact dimensions (typical unit measures 14.7cm diameter ¡Á 26.3cm length). Through extensive thermal imaging analysis, engineers optimized cooling channels that maintain operational temperatures below critical thresholds during sustained cranking operations.

Performance Advantages

The 080V26201-7236 demonstrates measurable improvements in cold-start performance, achieving reliable ignition at 60% battery charge levels where competitors fail. Its bidirectional brush system extends service life beyond 80,000 start cycles – nearly double the industry average. Field data collected from logistics companies shows HOWO trucks equipped with the 080V26201-7236 experience 22% fewer starter-related service interruptions.

Optimal Compatibility

Direct bolt-on replacement for HOWO A7, HOWO T7G, and HOWO T5G series manufactured 2015-present. The mounting flange dimensions (SAE No. 3 standard) ensure precise alignment with HOWO powertrains without shimming adjustments. Electrical specifications include 12V operation with peak current draw not exceeding 850A, compatible with standard HOWO electrical systems. The 080V26201-7236 design considers firewall clearances and exhaust routing specific to HOWO chassis configurations.

Durability Features

Military-grade IP67 sealing prevents dust and water ingress during deep-water fording operations. Shock-absorbing mounting system isolates the 080V26201-7236 from chassis vibrations using specialized rubber composites that maintain elasticity down to -45¡ãC. Corrosion resistance exceeds 720 hours in salt-spray testing through nano-ceramic coating applied to all external surfaces. Reinforced drive housing withstands backfire impacts up to 220 ft-lbs without deformation.

Maintenance Advantages

The 080V26201-7236 features accessible test points for bench diagnostics without disassembly. Modular design allows individual component replacement rather than full unit exchange, reducing service costs by 40%. Easily removable solenoid permits replacement in under 15 minutes with standard tools. Service intervals extend to 300,000 km under normal operating conditions with proper maintenance following HOWO service guidelines.

Installation Guide

Installation requires only three mounting bolts torqued to 45 ¡À 5 N.m following standard cross-pattern sequence. Cable terminals accept 16mm2 cables with M8 stud connectors featuring anti-vibration lock washers. Correct pinion-to-flywheel clearance (1.0-1.5mm) is factory preset, eliminating need for shim adjustment during installation. Always disconnect battery before installing the 080V26201-7236 unit to prevent electrical shorts.

Technical Specifications

• Nominal Voltage: 12V DC
• Power: 4.2kW
• Torque Output: 28-32 N.m
• Maximum Current Draw: 820A
• No-Load Speed: 5200 RPM
• Weight: 8.4kg
• Operating Temperature: -40¡ãC to 120¡ãC
• Drive Type: Gear reduction with overrunning clutch
• Bendix Teeth: 9-tooth hardened steel

Reliability Certification

Manufactured in ISO 9001 facilities using automated optical inspection systems that check 32 critical parameters per unit. Final validation includes 72-hour continuous cycle testing under load conditions simulating -25¡ãC cold starts. Each 080V26201-7236 ships with traceable QC documentation matching performance metrics recorded during final validation testing. Compliance certifications include ECE R10 electromagnetic compatibility and ISO 14982 vibration resistance standards.

Optimized Design Features

For heavy-duty HOWO applications, the 080V26201-7236 incorporates several key innovations:

• Copper-Graphite Brushes: Reduced friction coefficient enhances efficiency while minimizing arcing
• Oil-Shielded Bushings: Retain lubrication through 500+ operating hours
• Helical Spline Drive: Smooth engagement even with partially worn flywheel rings
• Flux-Concentrating Poles: Magnetic field optimization delivers 12% more torque in same form factor