Sinotruk Africa Strategic Partner.

Heavy-Duty HOWO Leaf Spring | Ultimate Strength & Reliability for Sinotruk Trucks

Ultimate Performance HOWO Leaf Spring – Unmatched Load Strength & Durability for Sinotruk Fleet

Heavy Duty HOWO Leaf Spring Assembly

HOWO leaf spring systems represent the backbone of Sinotruk’s heavy-haul reliability. Engineered from premium SUP9, SUP11, 52CrMoV4 alloy steel, each multi-leaf assembly withstands extreme torsion, delivers 25–40 tons payload support, and absorbs brutal vibrations across mining and construction sites. Whether you operate HOWO 6×4 dumpers or 8×4 tippers, our genuine-grade leaf springs ensure maximum uptime and safety.

Precision-tempered for consistent flexural fatigue resistance, every HOWO leaf spring prolongs axle life and reduces maintenance intervals. Upgrade your suspension with the original-standard component trusted by global fleet operators.

Learn More

HOWO Leaf Spring – Technical Types & Feature Overview

Parameter / TypeDetails & Features
Material GradesSUP9, SUP11, 52CrMoV4, 50CrVA – high tensile spring steel with superior elasticity
Thickness Range6mm up to heavy-duty 160mm (custom options for extreme profiles)
Width Options5mm – 60mm (standard heavy truck width optimization)
Leaf Configurations9-leaf front, 11-leaf (14mm thick), 14-leaf (14x90mm) extreme assemblies for 8×4 chassis
Heat TreatmentQuenching & tempering for high fatigue life, shot peening for residual stress relief
CompatibilityHOWO A7, HOWO 6×4, 8×4, Tipper, Dump trucks, and special heavy commercial vehicles

Hot-Selling HOWO Leaf Spring Categories & OEM Part Numbers

Front Leaf Assembly WG9725520077

Front Assy WG9725520077

9-leaf front spring, 18mm thickness, perfect for HOWO 6×4 tipper, supreme shock absorption.

Rear Spring WG9725520789

Rear Spring WG9725520789

Robust 11-leaf design for HOWO A7 series, 22mm thick leaves – maximum dump truck stability.

Heavy 14-Leaf WG9725520389

14-Leaf Extreme WG9725520389

Tailored for 8×4 chassis, 160mm total thickness, 40+ ton payload capacity.

Single Leaf Seventh Piece

Individual Leaf

Replace isolated leaf snaps without full stack; direct fit for HOWO tipper suspension.

Front Spring WG9731522011

Front Spring WG9731522011

10-leaf progressive rate design, ideal for highway and mixed terrain.

Spring Hardware Kit

Complete Hardware Kit

Includes U-bolts, center bolts, rubber seats & pins – all needed for replacement.

Compatible Truck Models – Perfect Fit for HOWO & Sinotruk Series

HOWO 6x4 Dump Truck

HOWO 6×4 Dump Truck

Standard 9-leaf front spring, heavy rear assembly with 11-leaf load distribution.

HOWO 8x4 Tipper

HOWO 8×4 Tipper

14-leaf extreme configuration, designed for mining & heavy aggregate transport.

HOWO A7 Series

HOWO A7 Series

Rear spring assemblies WG9725520789 & WG9725520389, premium road holding.

Sinotruk HOKA

Sinotruk HOKA

Robust spring eyes compatibility with 50mm width pins for long-haul heavy loads.

HOWO 4x2 Cargo

HOWO 4×2 Cargo

Medium-duty multi-leaf springs, optimal balance comfort and payload.

Sinotruk Tipper 6x4

Sinotruk 6×4 Tipper

Direct replacement OEM standard: WG9725520077 & WG9731522011.

Engineering Superiority – WHY HOWO Leaf Spring Outperforms

Ultra-high fatigue life – shot-peened surfaces reduce micro-crack initiation.
40+ tons payload support – engineered for mine-grade tippers.
Corrosion resistant coating – epoxy primer protects against rust and abrasion.
Progressive stiffness design – smooth empty ride & progressive load response.
Precision bushing eyes – reduces friction noise and enhances axle alignment.
100% OEM interchangeable – direct fit with existing mounting hardware.
Multi-leaf redundancy – even if one leaf cracks, others maintain safe driving.

HOWO Leaf Spring: Professional Repair & Maintenance Guideline

Regular inspection of your HOWO leaf spring prevents sudden breakdowns. Check for leaf gaps, cracks, or sagging every 15,000 km. Replace U-bolts each time you disassemble – torque to 280-320 Nm. Always lubricate spring pins and bushings with lithium grease to avoid metal squeak. In case of a broken individual leaf, replace only the damaged leaf rather than whole assembly if other leaves are intact, but always match thickness grade.

For heavy operations, inspect center bolt tightness and rubber support seats every month. Misalignment leads to uneven load distribution. Use genuine spring clips to keep leaf pack aligned. Proactive maintenance doubles leaf spring lifespan.

How To Select The Perfect HOWO Leaf Spring For Your Truck

Step 1: Identify Chassis Type
Check your truck model (6×4, 8×4, A7) and VIN plate. Front and rear spring codes differ.
Step 2: Determine Payload Needs
Heavy mining >35T requires 14+ leaf extreme assembly; standard logistics uses 9-11 leaf.
Step 3: Verify OEM Part Number
Cross-match original part like WG9725520077 or WG9725520789 stamped on old spring.
Step 4: Measure Thickness & Width
Use caliper to confirm leaf width (usually 90mm or 100mm) and total pack height.
Learn More about OEM selection guide

HOWO Leaf Spring: Preventive Care & Service Recommendations

Clean leaf spring pack after off-road trips to remove mud that accelerates inter-leaf friction. Apply anti-slip graphite spray between leaves every 6 months. Check torque on center bolt (80-100 Nm) annually. Replace rubber support seats when cracks appear; worn seats cause metal-to-metal contact and noise. Store spare springs in dry vertical racks to avoid distortion.

Never use acetylene torches to bend damaged leaves; always replace. For balanced handling, replace both left and right springs simultaneously. Use genuine howo leaf spring hardware kits for consistent performance.

Secure Industrial Packaging – Ready for Global Export

Steel strapping packaging

Heavy steel strapping & anti-rust oil coating

Wooden crate packaging

Reinforced wooden crate for sea/air freight

Shrink wrap and corner protection

Shrink film + foam padding, zero damage guarantee

Global Logistics – Sea / Air / Road Freight Solutions

Sea freight shipping

Ocean freight: 20/40ft containers, fast customs clearance

Air freight

Air freight: express delivery for urgent spare parts

Land / Rail transport

Land & rail: door-to-door delivery across Europe & Asia

Real Feedback from Fleet Operators

“Superb quality – genuine HOWO leaf spring fits perfectly on my 8×4 tipper. After 20,000 km no sagging.”

– Alex, Mining Fleet Manager

“Ordered WG9725520789 rear springs, packaging robust, arrived faster than expected. Improved ride stability.”

– Chen Wei, Logistics Director

“Excellent load capacity! Swapped old springs with HOWO 14-leaf, 40 ton loads feel controlled and safe.”

– Miguel, Construction Contractor

“Great technical support – they helped choose correct spring for my HOWO A7, easy replacement.”

– Pradeep, Fleet Owner

Top 10 Questions About HOWO Leaf Spring – Expert Answers

1. How often should I replace HOWO leaf springs? Typically 200,000 km under normal use, but heavy mining may require replacement every 100,000 km or when cracked.
2. Can I use a HOWO leaf spring on other Sinotruk brands? Yes, most HOWO springs fit Sinotruk HOKA, SHACMAN, and similar frames but verify mounting dimensions.
3. What is the difference between SUP9 and SUP11? SUP11 offers higher carbon and manganese content, better fatigue resistance for extreme heavy loads.
4. How to identify a genuine HOWO leaf spring? Check for stamped part numbers like WG97255xxxx, uniform thickness, and original heat treatment marks.
5. Are individual leaves available separately? Yes, we supply any leaf layer (first, middle, seventh) to replace isolated damage without buying full pack.
6. Do I need to replace U-bolts when changing springs? Absolutely. U-bolts stretch over time; reuse leads to torque loss. Always fit new high-strength bolts.
7. Can HOWO leaf springs handle extreme cold temperatures? Yes, spring steel formulated for -40°C to 80°C. Low temps increase brittleness, but proper alloy design prevents fracture.
8. Are these springs cost-effective vs aftermarket brands? Genuine HOWO leaf springs give longer life and lower total cost due to superior steel and consistent geometry.
9. What is typical lead time for international orders? Stock items shipped in 3–5 days, sea freight 25–40 days, air freight 5–8 days depending on destination.
10. Do you provide spring rate chart for different loads? Yes, each spring comes with load-deflection curve – for 11-leaf HOWO spring rate approx 230 N/mm.

Engineered for longevity, tested on extreme routes. Choose authentic HOWO leaf spring solutions to keep your fleet moving. Explore full catalog →

滚动至顶部