Ultimate HOWO Kingpin: Maximum Steering Precision & Heavy-Duty Reliability for Your Fleet
HOWO kingpin is the core steering component for Sinotruk HOWO heavy-duty trucks, engineered to withstand extreme vertical loads and lateral forces during cornering on mining sites or rough terrains.
The genuine HOWO kingpin uses high-strength forged chromium alloy steel (40Cr / 42CrMo) with induction hardening achieving HRC 52-62. Precision CNC-ground journals guarantee tolerance ±0.01mm, eliminating steering wobble and enhancing driver safety.
Whether your HOWO works in logistics, construction or mining, choosing a reliable HOWO kingpin ensures longer tire life and stable vehicle alignment. Trust the pivot point that keeps your wheels rotating flawlessly under maximum GVW.
HOWO Kingpin Types & Technical Specifications Table
| Parameter | Details & Values |
|---|---|
| Material | 40Cr / 42CrMo forged chrome alloy steel |
| Surface Hardness | HRC 52 – 62 (carburization + induction heat treatment) |
| Machining Tolerance | ±0.01mm CNC ground journals |
| Common Dimensions | 43×206 mm, 45×200 mm, 47×206 mm |
| Kit Types | Standard kingpin kit, heavy-duty AC16 axle kit, complete rebuild kit with bushings & bearings |
| Load Capacity | Heavy-duty mining & extra heavy transportation up to 120T GCW |
| OEM Compatibility | Sinotruk HOWO 6×4, 8×4, T7H, A7 series, and special chassis |
Popular HOWO Kingpin Models & Hot-Selling Part Numbers

WG9719410031
Standard heavy-duty chassis kit for HOWO 7 series tippers & cargo trucks. Direct fitment, premium hardness.

WG4005415303
Heavy-duty front steering assembly for AC16 axles. Extreme-duty design for mining and off-road.

WG4071415005-KIT
Factory-spec rebuild kit includes pins, bushings, bearings & grease caps. All-in-one solution.

WG4005415624
Precision adjusting washer for axial play elimination. Crucial for perfect steering geometry.
Compatible Truck Models for HOWO Kingpin

HOWO 7 Series
6×4 & 8×4 tipper and cargo chassis – perfect match for WG9719410031 kingpin kit.

HOWO T7H
High horsepower tractor units, requires robust kingpin with precise tolerance for long hauls.

HOWO A7
Luxury heavy trucks with AC16 axles, rely on WG4005415303 for consistent steering feel.

Sinotruk Mining Dumpers
Extreme off-road conditions – forged kingpins with HRC 60+ guarantee durability.
WHY CHOOSE OEM-QUALITY HOWO KINGPIN: Advantages & Features
Induction hardened surface reaches HRC 58-62, resists abrasion even in sand and gravel haulage.
CNC tolerance ±0.01mm eradicates steering shimmy and improves high-speed stability.
Chromium alloy steel withstands dynamic loads beyond 25 tons per axle for mining applications.
Advanced phosphate or zinc plating prevents rust, ensuring longer service life in wet climates.
Optimized internal lubrication channels simplify maintenance and extend replacement intervals.
Proper alignment reduces rolling resistance – proven 3% fuel savings for long-haul fleet.
Professional Repair & Maintenance of HOWO Kingpin
• Check axial play every 30,000 km.
• If kingpin moves more than 0.5mm vertically, replace bushings and pins.
• Use OEM shims (WG4005415624) to adjust preload.
• Always press-fit new bushings and ream to exact diameter.
• Worn kingpins cause uneven front tire wear and steering wander.
• Replace as full kit (pins + bushings + thrust bearing) for optimal geometry.
HOWO Kingpin Maintenance & Care Recommendations
Grease via zerks every 10,000 km using lithium-based EP2 grease. Avoid over-greasing to prevent seal damage.
Inspect for steering stiffness, clunking noises or play. Tighten lock nuts to 280 Nm torque.
Uneven tire feathering, vibration on highway, “memory steer”. Prompt replacement avoids axle beam damage.
Cover kingpins with anti-rust film if vehicle parked for months; rotate steering weekly.
How to Choose the Right HOWO Kingpin for Your Truck
Measure original kingpin diameter (43/45/47 mm) and length. AC16 axles require special heavy-duty part number.
Match chassis VIN to Sinotruk part codes: WG9719410031 for 7-series, WG4005415303 for AC16, etc.
Mining / severe duty? Opt for induction-hardened kingpin with HRC>58. On-highway? Standard 40Cr works well.
Always select OEM-certified HOWO kingpin from reliable suppliers to avoid premature wear and safety risks.
Secure Packaging for HOWO Kingpin Shipments



Global Logistics – Sea, Land & Air Freight Solutions



Customer Testimonials for HOWO Kingpin
“Installed the HOWO kingpin kit on our 8 tippers. Zero steering play after 60k km, definitely premium quality.”
“Extreme cold & heavy loads – these kingpins survive where cheap parts fail every month. Highly recommend.”
“WG4005415303 kit fits perfect on AC16 axles. Smooth steering and easy installation, saves workshop time.”
“100+ trucks upgraded with OEM-spec HOWO kingpin, tire wear reduced by 40% and drivers feel safer.”
Frequently Asked Questions About HOWO Kingpin
Pro Tips: Maximize Steering Lifespan with HOWO Kingpin
Always clean axle beam bores, use new thrust bearings, torque lock pins to 220-260Nm. Pre-grease before assembly.
Regular kingpin maintenance reduces downtime by 18% and extends tire life by 30% for heavy fleets.
If steering feels loose on remote roads, check for axial play using pry bar – temporary tightening can prevent damage.
Upgrading to induction-hardened HOWO kingpin yields more than 500,000 km service life under highway conditions.